 |
PM |  | |
Quote | | |
Reply | | |
Full Topic | |
| Joined: | 07-23-2005 |
| Location: | Franktown, Colorado USA |
| Posts: | 69 |
| Status: |
Offline
|
As far as the mini switch, I did remove it before sandblasting the box and cleaned it out. I have the baffles adjusted so that the cold setting in fact does depress the plunger so all is good there. More good news is that I hooked up the vacuum line directly to the bypass water valve and it immediately opens and moves freeley.
I think I have a bad line either from the vacuum port to the mini valve or from the mini valve to the bypass valve so if I can find the correct size lines at an auto store I should be good to go. Thanks again for your help
Lash