View single post by chiromaster
 Posted: 04-25-2011 02:48 pm
PM Quote Reply Full Topic
chiromaster

 

Joined: 03-22-2010
Location: Phoenix, Arizona USA
Posts: 37
Status: 
Offline
I did check the floats for leaks. They are fine. When I did the rebuild, I did one carb at a time being careful to put them back exacaly as they were. After reading about float levels I thought I should compare the two side by side. So I took the top covers off and compared...one float was upside down.

Last edited on 04-25-2011 02:48 pm by chiromaster