 |
PM |  | |
Quote | | |
Reply | | |
Full Topic | |
| Joined: | 04-01-2008 |
| Location: | Sandefjord, Norway |
| Posts: | 617 |
| Status: |
Offline
|
Second: there should be a 0.015" gap between the manifold surface and the O-ring holder, and the same gap between the O-ring holder and the carb.
Ooops! It suddenly struck me that I got the mm-to-inches conversion wrong! The correct measurement is 0.030" (0.75mm). Measure with a feeler blade.
--
Joachim