| View single post by Greg_M | |||||||||||||
| Posted: 02-12-2011 05:32 am |
|
||||||||||||
Greg_M
|
I ran into problems last week that were unanticipated. I was fitting up a new front spoiler and discovered that the lower front valance was badly dammaged. After a little thought, I remembered a couple off track excurisions that were made i the cars race days. OK I thought, no problem, I have a new one in stock. More bad news, when trying to fit the new valance I found that the Radiator Core Support was also damaged and out of sorts. So after spending several hours of trying to straighten it, I came to the realization that it was hopless. OK, no problem, I have a new Radiator Core Support in stock. Four hours later I have the old support out of the car. Here is a picture of the car ready for the new support. Note the Kent Cams HTD Pulleys. Just had to have them. More about that later. Attachment: JH Radiator Core Support Removed a.jpg (Downloaded 153 times)
|
||||||||||||
|
| |||||||||||||
