View single post by StevenD57
 Posted: 01-21-2011 02:30 pm
PM Quote Reply Full Topic
StevenD57



Joined: 04-10-2009
Location: Hubbard, Ohio USA
Posts: 103
Status: 
Offline
I don't know what a kickstand switch, or a tilt switch or an igniter are going to do for you but you also have to be aware that the throttle position sensor has to be a potentiometer type. Some throttle position sensors only indicate when WOT is reached or perhaps when the throttle is closed so if it is this type then it is useless. The TPS you need has to be one where there is a variable resistance that changes as the throttle is opened or closed. Typically they have three wires, ground ref, signal out, and 5v supply voltage.