View single post by Brett Gibson JH5 20497
 Posted: 12-05-2010 03:18 pm
PM Quote Reply Full Topic
Brett Gibson JH5 20497

 

Joined: 03-17-2005
Location: Hilton, New York USA
Posts: 712
Status: 
Offline
Not enough info .......

Do a compression test to see if your engine is any good

Align the crank at TDC, do the cam marks line up, is the distributor rotor pointing at the #1 spark plug lead, pull the #1 plug is the piston at the top, do you have the spark plug wires in the right firing order, whats the condition of the cap and rotor, any carbon build up ......

Did you clean up the wiring connections.

Did the car run before what ever you did to it, can you undo what you did to see if it will run.

Is this the car that was turning over slow ???

I feel bad for you but you need to verify the basic's, Dell's are another issue entirely but if you havent touched them since it did run, (Knockwood). they may not be a problem.

Brett